PC-3000 SAS 6 Gbs.jpg
20-years.png

4 Diagnostics Port

SAS | SCSI | RAID RECOVERY

SEAGATE | HIITACHI  TOSHIBA |MAXTOR | QUANTUM | IBM

OVERVIEW

The PC-3000 SAS 6 Gbit/s is a hardware-software solution intended for testing and restoring damaged HDDs with SAS (Serial Attached SCSI) or SCSI based interfaces.

The PC-3000 SAS 6 Gbit/s coupled with the Data Extractor SAS forms the PC-3000 SAS 6 Gbit/s Professional System, which allows you to recover data from SAS or SCSI based HDDs. To repair these HDDs, you only need the PC-3000 SAS 6 Gbit/s – for data recovery you need both the PC-3000 SAS 6 Gbit/s and the Data Extractor SAS.

INTELLIGENT POWER SUPPLY

A 4-channel Power Supply Unit is used to power the HDDs which are connected to PC-3000 Express. The Power Supply Unit protects the HDDs from overvoltage and overcurrent. In case of emergency, the HDDs will be powered off automatically. Furthermore, each channel has feedback with the PC-3000 software for monitoring the stability of +5V and +12V voltage supply and informing the user about any problems in power circuits.

PC-3000 SAS Kit

PC-3000 SAS kit.tif

INTELLIGENT POWER SUPPLY

A 4-channel Power Supply Unit is used to power the HDDs which are connected to PC-3000 Express. The Power Supply Unit protects the HDDs from over-voltage and over-current. In case of emergency, the HDDs will be powered off automatically. Furthermore, each channel has feedback with the PC-3000 software for monitoring the stability of +5V and +12V voltage supply and informing the user about any problems in power circuits.

PC-3000 SAS 6Gbs.png
1. PC-3000 SAS 6 Gbit/s controller
2. SAS SFF-8482/SATA/Molex (100cm) cable
3. HDD SCSI (50 cm) power cable
4.PC-3000 SAS software
5. User manual